Shop Online

Customer Login     About Us     Contact Us     Follow Us: 

 1-877-373-6677
Hours: Mon-Fri 9-6
 

 

 
 


Starbrick Stoves is an Upfront Merchant on TheFind. Click for info.

SSL CertificateExtended Validation SSL
spacer
 

   Hearth Pads - UL1618 Compliant Stove Boards  Mocha Metallic Hearth Pad


Mocha Metallic Hearth Pad (AP/BAC)


Starting at $589.00
Select Size

Select Sape

Select Type of Hearth Pad

Select 5" High Wood Pedestal


Quantity:  


This product is Made in the USA.

Made In The USA



For your stove board dimensions click here (PDF File)

Mocha Metallic Hearth Pad (AP/BAC)
Mocha Metallic Hearth Pad (AP/BAC)




These hearth pad can be used indoors and outdoors.
Accent your home with a quality hearth pad. Hearth products are crafted from a variety of quality stone and ceramics - expertly finished for maximum durability. Choose from a wide range of styles and enjoy the security of knowing your hearth pad meets all necessary UL listings including, but not limited to, Subject 1618.

Tested, Approved & listed to UL-737, UL-1482, UL-127, UL-1618 & NFPA 211 safety standards for wall and floor protection and hearth extensions!

Oak pedestals are 5 inches high and tile pedestals are 6 inches high.
Tile boards are 1 1/4 inches and slate boards are 1 3/8 inches thick.


Yes we can do it.. We have a minimum charge on custom boards. Please contact us to receive pricing on the boards that you want us to custom build for you.


2-3 weeks all pads are made to order


The industry standards for hearth pads (a.k.a floor boards, floor protectors, and wall boards) will be a reality. Currently productions of hearth pads are built to UL subject 1618 and are acceptable for purchase and installation at any time. The two major points are 1618 will only allow R-Value to be measured with non combustible material.

1. Existing Subject 1618 allows the rated R-Value of a floor protector to include combustible material (i.e.
particle board). The new Standard 1618 will only allow R-Value to be measured with non combustible material.

a. Under Subject 1618 a hearth pad built with ¾" particle board would have an R-Value of around 1.18. Under Standard 1618 the same hearth pad would have an R-Value of about 0.03.

b. The hearth pad under Standard 1618 would qualify as a Type I hearth pad- ember protection only.

2. Standard 1618 will allow for two types of hearth pads- Type I (Ember Protection) and Type II (Ember and Thermal Protectors) will have to be tested per the UL Standards 1618.

The new Standard 1618 will require both Type I (Ember Protection) and Type II (Ember & Thermal Protection) will have to be tested per the UL Standard 1618. Some of the bullet points of each.

Type I (Ember Protection)
Certified UL Tested
Type I Labeling

Type II (Ember & Thermal Protection)
Ember Protection
Thermal Protection (R-Value of 1 Min)
Non- Combustible Materials Only
Certified UL Testing Required
Type II Labeling

What you need to know- any stove that requires the floor protection to also provide thermal protection must be installed on a Type II hearth pad, regardless of how small the R-Value required (i.e. R=6) a Type I Hearth pad is not acceptable! In additional, some stove models may require thermal protection that exceeds the R-Value of the hearth pad, in which case a pedestal offering additional R-Value may be required. American Panel Hearth Products has a product or combination of products for any stove installation requirements.

The vast majority of stoves that are manufactured do not require thermal protection we will be offering a Type I hearth pad- please not our new hearth pad will contain only non combustible materials.

Both Type I and Type II contain only non-combustible materials

Both Type I and Type II can be used with pedestal/risers that offer additional thermal value protection (higher R-Value)

Due to the design of our Type II, Installation on carpet is acceptable.



Q: Can I order a custom size board?
A:Yes. We have a minimum charge on custom boards. Please contact us to receive pricing on the boards that you want us to custom build for you. Boards cannot exceed 60 inches.

Q: How high are the pedestals?
A:Oak pedestals are 5 inches and tile pedestals are 6 inches.

Q: How thick are the boards?
A:TYPE 1Tile board is 1 inch, TYPE 1 Slate board is 1 3/8 inches;
TYPE 2 Tile board is 1 1/2 inches and the TYPE 2 Slate board is 1 5/8 inches.